Filter
Top Products
322 Problem Solver
PAPER SKEW
LOAD PAPER
PROPERLY
The paper is not loaded
straight, and needs to be
aligned.
Release the paper
lever, and then set the
paper properly. Finally,
set the paper lever to
the secured position.
See “Loading roll
paper” on page 250.
PAPER CUT ERROR
REMOVE UNCUT
PAPER
Paper is not cut correctly
when Roll Auto Cut On
is selected.
Release the paper
lever, and then remove
the uncut paper.
Finally, set the paper
lever to the secured
position.
The paper cutter may
not be installed
correctly. See
“Replacing the Paper
Cutter” on page 300.
Paper cutter may be
blunt. Replace the
paper cutter. See
“Replacing the Paper
Cutter” on page 300.
COMMAND
ERROR
CHECK DRIVER
SETTINGS
Damaged data is sent to
the printer.
Stop printing, and then
press the Pause button
for 3 seconds.
The printer receives data
with a wrong command.
The installed printer
driver is not correct for
the printer.
Stop printing, and then
press the Pause button
for 3 seconds. Finally,
make sure that the
installed printer driver is
correct for the printer.