Filter
Top Products
364 Product Information
Initialization
Standards and Approvals
Hardware initialization at power on The printer mechanism is set to its
initial state.
The input data buffer and print
buffer are cleared.
The printer returns to the default
condition last set.
Software initialization when the
ESC@ (initialize the printer)
command is received
The print buffer is cleared.
The printer returns to the default
condition last set.
Panel button initialization by
pressing the Pause button on the
control panel for 3 seconds, or *INIT
signal is sent
Print head capping occurs.
Paper is ejected, if any.
The input data buffer and print
buffer are cleared.
The printer returns to the default
condition last set.
Safety UL 60950
CSA 22.2 No. 60950
Low Voltage Directive 73/23/EEC EN 60950