Filter
Top Products
SNMP General Settings fields
To edit the SNMP General Settings fields, ensure that the
SNMP
Enabled
check box is
selected (SNMP is disabled by default). Click the
Submit
button to save all changes or the
Cancel
button to abandon changes.
SNMP Community Name fields — The two names are similar to passwords, granting
public, read‑only [SNMP (rd)] and private, read‑write access [SNMP (wrt)] to the NMS. The
default names are
public
and
private
.
Contact Name and Location fields — The two fields add optional information as to the
location of the NMS. By default, Not Specified is assigned to the
Name
and
Location
fields.
SNMP Port field — This field identifies the port that the NMS uses to communicate with
the switcher and should only be changed by IT personnel. The default port is 161.
SNMP Manager (Trap Target) fields
To edit each row of the SNMP Manager (Trap Target) settings, click the
Edit
button to make
the fields available for editing. The button changes to
Save
. After editing the associated
settings, click the
Save
button.
The three IP Address fields identify up to three NMS targets to receive trap notifications of
the switcher failure and repair status or a mix of trap types to the same target.
The check boxes and drop boxes associated with each IP address field permit the operator
to specify specific criteria under which the switcher sends trap notifications.
• In the associated
Missing
Input
drop boxes, select the inputs to trap the presence or
absence of a signal.
• Check the
Fans
and
Power
boxes to trap the fans and power supplies.
• In the associated
Notification
Options
drop box, select whether to notify the target
of failures, fixes, both, not notified, or to remove the target from trap list (select
Delete
SNMP
Target
). The
Suspend
option is useful for temporarily removing NMS stations from
the notification list when they are unavailable.
FOX Matrix 3200 and 7200 Switchers • HTML Operation 104