Filter
Top Products
Preferences menu
• Immediate Changes — Causes changes to take effect
immediately.
• Hold/Verify Changes — Delays implementation of
changes until the
C
hanges – Take button is clicked.
• Ties as Lines — Displays ties as lines (see figure 46).
Figure 46. Ties Shown as Lines
• Ties as Crosspoints — Displays ties as a matrix of
inputs and outputs (see figure 47). Ties that have been made are indicated as amber
boxes. Ties that will take effect when you click the Take button are indicated by +. Ties
that will be broken when you click the Take button are indicated by –.
Figure 47. Ties Shown as Crosspoints
• Limit ties to same Group — Allows you to limit tie creation using the program to
inputs and outputs that are in the same group (similar to front panel operation).
• Link-detection options — Allows you to set the link detection feature as follows:
• To automatically refresh the display every 10 seconds.
• To update the display whenever you refresh the screen.
• To never sample and display the link status
NOTE: For the FOX Matrix 7200, this menu selection displays as
Freq/Link-detection options.
• Icons in I/O Boxes — Erases any numbers in the I/O boxes in either
the ties‑as‑lines window display (see figure 34 on page 75) or the ties‑as‑
crosspoints display (see figure 47, above). You can place icons in the boxes.
• Numbers in I/O Boxes — Erases any icons in the I/O boxes in either the
ties‑as‑lines window or the ties‑as‑crosspoints display, and fills each box with
the associated input or output number.
FOX Matrix 3200 and 7200 Switchers • Matrix Software 88