Filter
Top Products
Tools menu
• Assign Device Icons — Displays the complete set of
input and output device icons. You can drag any of these
icons to the input and output boxes.
• Edit Device Palette — Allows you to add your own
device icon graphics.
• Mute-Outputs settings — Displays the Mute Adjust
window, from which you can mute each output.
• FOX Re-clocker settings — Displays the FOX
Reclocking Rate Settings window, from which you can
select the reclocking rate for one or all outputs and mute
and unmute the output.
• View Input Frequencies — Displays the Input
Detection window, which shows the data rates for SDI
and HD‑SDI inputs only. This selection is not available if
no BNC 3G/HD/SD‑SDI boards are installed.
• Update Firmware ... — Allows you to replace the
firmware that is coded on the control board of the switcher without taking the switcher
out of service (see Updating the firmware on page 80).
• IP Options — Allows you to set IP options (see IP Settings/Options window on
page 76).
• HTML File Manager — Displays a list of HTML files installed on the switcher and
allows you to upload custom files from a PC connected to the switcher (see Uploading
HTML files on page 84).
• Hardware Status — Provides an overall view of the status of the matrix
switcher, including the power supply voltages, the temperature status, the
Remote RS‑232/RS‑422 port configuration, and the installed and updated firmware
status (see figure 44).
Proper operation.
Component has failed.
Figure 44. Status Window
FOX Matrix 3200 and 7200 Switchers • Matrix Software 86