Filter
Top Products
Windows Buttons, Drop Boxes, and Trash Can
The buttons, drop boxes, and trash can on the right side of the program window perform
the following functions:
• Power — Unavailable for FOX Matrix switchers.
• Executive Mode — Allows you to lock out front panel operations,
except for the view‑only mode functions. Click the button to cycle
between locked (the indicator displays red) and unlocked (the indicator is
white).
• Room menu — Displays a list of up to 10 rooms. You can select a room
from the list to display it in the window.
NOTE: A room is a subset of outputs that the operator logically relate
to each other. The FOX matrix switcher supports up to 10 rooms,
each of which can consist of 1 to 16 outputs.
• Presets menu — Displays a list of up to 32 (FOX Matrix 3200) or
64 (FOX Matrix 7200) global presets and up to 100 room presets. You can
select a preset from the list to display it in the window and either activate it
(
Go
) or delete it (
Delete
).
• Go — Activates the selected preset as the current configuration.
• Save as ...
— Allows the current set of ties to be saved as a preset. Enter
the preset number when prompted to do so.
• Delete — Allows the current preset to be deleted.
• Changes – Take — Saves any changes made to the displayed configuration.
• Changes – Cancel — Abandons any changes made to the displayed configuration.
• Trash can — Drag and drop from an input or output button to the trash can to unmake
all ties associated with that input or output.
Windows menus
File menu
• Save MATRIX settings as ...
— Saves a complete set of
up to 32 (FOX Matrix 3200) or 64 (FOX Matrix 7200) global
presets, rooms, room presets, and preset names plus the
last active setting (preset 0), to a file. Saved settings include
assigned icons and icon captions.
• Restore MATRIX settings from ...
— Loads and activates
a previously saved setting file.
• Save This-Session’s settings — Saves the current assigned icons and icon
captions.
• Restore Last-Session’s settings — Loads the icons and icon captions that
were saved during the last session. If you saved the changes from the previous session
to disk the last time you exited the program, the ties from that session are also loaded.
• Select Printer — Selects the target printer.
• Print Tie Map — Prints the tie set that is displayed on the screen.
• Exit — Closes the Matrix Switchers Control Program.
FOX Matrix 3200 and 7200 Switchers • Matrix Software 85