Filter
Top Products
Installation
This section details the installation and configuration of the FOX Matrix Switchers, including:
• Setup and Installation Checklist
• Rear Panel Boards, Cabling, and Features
• Front Panel Configuration Port
Setup and Installation Checklist
Get Ready
Familiarize yourself with the FOX matrix switcher.
Obtain IP setting information for the matrix switcher from the local network
administrator. Read the Ethernet Connection section, beginning on page 117.
Configure the Matrix Switcher
Install the desired I/O boards (page 110).
Perform Physical Installation
If desired, install the switcher in a rack (see Mounting the Switcher on page 109).
If desired, create (Page 92) and replace (Page 115) button labels.
Cable input and output devices to the I/O boards (page 11).
If desired, connect computers or control systems to any of the remote control ports on
the switcher (two serial ports [page 13 and page 17] and a LAN port [page 13]).
Connect power (page 16).
Test the switcher by creating a tie (page 27).
Ancillary Operations
Install the Matrix Switchers Control Program (page 72).
FOX Matrix 3200 and 7200 Switchers • Installation 7