Filter
Top Products
Example 5: Grouping inputs and outputs
In the following example, several switcher inputs and outputs are assigned to groups. The
steps show the front panel indications that result from your actions.
1. Clear all selections: Press and release the Esc button.
2. Enter I/O Group mode: Simultaneously press and hold the Input 1 and Output 1
buttons for approximately 2 seconds and then release the buttons.
1
1
17 18 19
1 2 3
17 18 19
1 2 3
Press and hold the Input 1 button and Output 1 button.
Release the Input 1 button
and Output 1 button.
Ungrouped input and
output buttons light.
2 seconds
3. Select group 1: Press and release the Enter button.
C O N T R O L
PRESET
ENTER
ESCVIEW
Press and release the Enter button to select group 1.
The button lights to indicate the selection.
1324Group #
4. Assign inputs and outputs to group 1:
a. Press and release the Input 1 through 4 buttons.
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
INPUTS
One at a time, press and release the Input 1 through Input 4 buttons.
The selected buttons light.
b. Press and release the Output 1 through 4 buttons.
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
OUTPUTS
One at a time, press and release the Output 1 through Output 4 buttons.
The selected buttons light.
FOX Matrix 3200 and 7200 Switchers • Operation 35