Filter
Top Products
Uploading HTML Files
You can create customized HTML pages for the switcher to display. The HTML Files List
window (see figure 43) provides a way to view the contents of the file system of the switcher
and to upload custom HTML pages to the switcher.
7 8
4
Figure 43. HTML Files List Window
NOTES:
• The files listed in figure 43 are shown for example only and may not be present on
your switcher.
• The HTML Files List window is for inserting your custom HTML pages. This is
not the window to replace the firmware that controls all switcher operation. See
Updating the Firmware on page 80 to replace the firmware.
• The HTML language reserves certain characters for specific functions (see Special
Characters on page 70).
Upload HTML pages as follows:
1. Connect the PC to the FOX matrix switcher via a serial port or the LAN port.
2. Start the Matrix Switchers Control Program and connect to the FOX matrix switcher
(see Using the Matrix Switcher Control Software, steps 1 through 3, starting on
page 73).
3. Click
Tools
>
HTML
File
Manager
.
4. Click the
Pick
File(s)
to
Load
to
Server
button. An open file window appears.
5. Navigate to the folder where you saved the HTML file or files. Select the file or files.
NOTES:
• To select multiple files, hold the Ctrl key while you select the desired files.
• If you want one of the custom HTML files that you created to be the default
start‑up page, name the file “index.html.” The FOX matrix switcher looks for
that file name when you first connect to it using an Internet browser.
6. Click the
Open
button. The upload of the file or files to the FOX matrix switcher may take
a few minutes.
7. Click the
Update
button to confirm the upload.
8. Click the
Close
button to exit the HTML Files List window.
FOX Matrix 3200 and 7200 Switchers • Matrix Software 84