Filter
Top Products
5. Select
Fiber Matrix
as the Matrix Model,
3200
or
7200
as the Default Size, and either
singlemode
or
multimode
for each board installed (see figure 49). Click
OK
.
Figure 49. Emulate Mode Configuration
6. Continue using the program as described in the Using the Matrix Switcher Control
Software, steps 1 through 3, starting on page 73).
Using the Help System
For information about program features, you can access the help program in any of the
following ways:
• From the Extron Electronics program folder or group, double‑click the
MATRIX Switcher Help icon (shown at right).
• From within the Matrix Switcher Control Program, click
Help
>
Contents
on
the menu bar.
• From within the Matrix Switcher Control Program, press the <F1> key.
FOX Matrix 3200 and 7200 Switchers • Matrix Software 90