Fujitsu DL9300 Printer User Manual


 
USING SETUP MODE
User's Manual5-28
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Items
Options Description
<PRT-DIR>
BI-DIR Bidirectional printing. The printer
prints in either direction while
seeking the next print direction for a
shorter print time.
UNI-DIR
Unidirectional printing. Unidirectional
printing is used for printing vertical
lines in tables even if vertical alignment
is not adjusted. Unidirectional printing
is slower than bidirectional printing.
<BUZZER> Enables or disables the printer status
buzzer.
ON Buzzer on (recommended).
The printer beeps to indicate paper-
out or other conditions.
OFF Buzzer off under any conditions.
<WORD-LG> To determine the required word
length, refer to your computer
documentation. Select 8-BIT to print
bit image graphics.
8 BIT 8-bit word length (used by most
computers)
7 BIT 7-bit word length (MSB = 0)
<BUFFER> Assigns buffer memory to input data
and downloaded font data.
Print buffer Download buffer
NONE 0 byte 96K bytes
256BYTE 256 bytes 95.75K bytes
2KBYTE 2K bytes 94K bytes
8KBYTE 8K bytes 88K bytes
24KBYTE 24K bytes 72K bytes
32KBYTE 32K bytes 64K bytes
96KBYTE 96K bytes 0K bytes