Fujitsu DL9300 Printer User Manual


 
PAPER HANDLING
User's Manual3-24
NOTE
If the bottom perforation of your paper is not positioned at
the tear-off edge, the length of your paper may not be speci-
fied correctly in your software or the printer setup mode.
Check that the paper length is specified correctly. For
information on specifying page length using setup mode, see
Chapter 5.
2. Tear the paper off at the perforation.
3. Press any button to retract the forms back to the top-of-form
position.
Tearing off continuous forms (rear feed)
Tearing off continuous forms (front feed)