Filter
Top Products
Setup Mode
USING SETUP MODE
User's Manual 5-41
RESETTING DEFAULTS This section describes how to reset the printer’s power-on defaults, all
of the factory defaults, or the factory defaults only for MENU1 and
MENU2.
Resetting Power-On Defaults
Power-on defaults are the settings saved in the printer’s permanent
memory. The defaults are enabled whenever you turn the printer on.
The easiest way to reset the power-on defaults is to turn the printer
off and then on again. This method is useful if you have made
changes in setup mode that you do not want to save.
Resetting Factory Defaults
Factory defaults are those settings preselected at the factory. For a list
of the printer’s factory defaults, see the section Printing a List of
Selected Options earlier in this chapter. To reset the factory defaults
for all functions, proceed as follows:
1. Turn off the printer.
2. While pressing the FRONT DIR and, TEAR OFF buttons, turn
on the printer. Continue to press all three buttons until the
printer beeps.
The factory defaults are now reset.
Resetting Factory Defaults in MENU1 and MENU2
This method resets factory defaults for MENU1 and MENU2 options,
listed in Table 5.3, but does not reset the printer hardware, print
position adjustment, and configuration options. To reset the factory
defaults in MENU1 and MENU2, proceed as follows: