Fujitsu DL9300 Printer User Manual


 
Setting Up
SETTING UP
User's Manual 2-35
Generally, the printer driver controls the printer. You can also controls
the printer using the remote setup utility program, DLMENU, stored in
the DLMENU floppy disk which is furnished with the printer.
This section focuses on the DLMENU. The DLMENU allows you to
easily change your printer’s features directly from your computer
display and keyboard in place of the printer’s control panel. You use it
to configure your printer to suit the requirements of your computer,
software, and documents to be printed. The DLMENU also has
maintenance-aid functions which allows you to print self-test reports
and print commands and data in hexadecimals.
The parameters you can change using the DLMENU affect page layout,
font, and printer control. If your software programs have printer
drivers, the printer drivers control these parameters for you. You may
never need to change the settings manually using the DLMENU.
For more details and the latest modifications, refer to the “ReadMe.txt”
file on the DLMENU disk.
The DLMENU first displays the opening screen then the main menu.
The main menu offers functions to select print options for your
documents. It also offers an operation guide of some keys and a help
message line. If the printer is not ready or has an error, a status
message is displayed. The top menu bar offers pull-down menus for
file functions, emulation selection and interface setting, and mainte-
nance. You can select options or perform a function by using the main
menu and top menu bar accessed through your mouse or keyboard.
One of the six languages is selectable for messages when installing the
DLMENU.
To use the DLMENU, the following are require: :
IBM PC/AT or compatible or PS/2
PC DOS 5.02, MS-DOS 3.3, or higher
VGA (640 x 400) or higher display
Hard disk driver installed (1 MB essential for DLMENU)
3.5-inch 2HD floppy disk drive (1.44 MB)
INSTALLING DLMENU
(REMOTE SETUP UTILITY)