Fujitsu DL9300 Printer User Manual


 
PAPER HANDLING
User's Manual3-18
Loading Continuous Forms (Front Feed)
This section explains how to use continuous forms as the tractor unit is
installed at the front of the printer. The tractor unit pushes continuous
forms. This condition applies when you first purchase the printer.
Up to 8-ply media can be fed by the front tractor unit.
You can use continuous forms paper even if you have a cut sheet
feeder installed at the rear of the printer.
To load continuous forms paper:
1. Make sure that the printer is turned on. Remove any single-
sheet paper from the printer.
2. Lift up the paper table as shown below.
3. Press the PAPER PATH button to select “FRONT TRACTOR”.
(The indicator lights.)
Paper table
Preparing to load continuous forms paper