Fujitsu DL9300 Printer User Manual


 
Maintenance
User's Manual 6-7
MAINTENANCE
REPLACING THE PRINT HEAD The print head is easy to replace.
CAUTION
The print head may be hot if you have been printing recently.
To remove the print head:
1. Turn off the printer.
2. Open the front cover of the printer and remove the ribbon
cartridge.
3. Pull the left end of the head lock wire forward to release it
from the hook at the left of the print head carriage. Then
release the wire from the center hook.
4. Release the wire (under the head) on the left side.
5. Remove the print head from the connector on the carriage, as
shown in the figure below.
Wire
(Left side releases)
Replacing the print head