Filter
Top Products
SETTING UP
2-28 User's Manual
SELECTING AN EMULATION Before printing with your software, verify that the correct emulation is
selected on your printer. This section describes the available
emulations and their selection.
For Experienced Users:
The printer’s preselected factory setting is the Fujitsu DPL24C PLUS
emulation. If this emulation is acceptable, you may skip this section.
An emulation is a set of commands used by your software to communi-
cate with the printer. There are many different emulations available for
printers. Each emulation has unique features and capabilities. This
printer offers three resident emulations:
• Fujitsu DPL24C PLUS (for Fujitsu DL-series printers)
• IBM Proprinter XL24E
• Epson ESC/P2
Resident emulations are stored in the printer’s permanent memory.
Here are some points to help you determine which emulation to select:
√ Determine which emulations your software supports. (Refer to
your software documentation.) Since most software programs
support this printer, try to run a program with the factory
default emulation first. (DPL24C␣PLUS emulation is the factory
default.) Try this emulation even if you are not sure of which
emulation to choose. See Chapter 5 for detailed information
about how your printer communicates with your software.