Fujitsu DL9300 Printer User Manual


 
Setup Mode
USING SETUP MODE
User's Manual 5-3
Initial printout in setup mode
3. Press the MICRO and MICRO buttons simultaneously until
the printer beeps.
ONLINE
LOAD
LF / FF
TEAR OFF
MICRO
MULTI
COPY
FRONT DIR
FRONT
MULTI
SAVE TOP
PAPER PATH
MICRO
SET UP
POWER PAPER OUT
FRONT
TRACTOR
REAR
TRACTOR
CUT
SHEET
Entering setup mode
If you do not hear a beep or hear an alarm beep (beeps four
times), you are not in setup mode. Place the printer offline and
try again.
4. When the printer enters offline setup mode, it prints the
following information.
Function buttons in
setup mode
Function
Red cursor on print guide
<<FUNCTION>> menu