Fujitsu DL9300 Printer User Manual


 
PAPER HANDLING
User's Manual3-4
This printer has a variety of paper paths and feed directions.
Paper Paths and Feed Directions
: Cut sheet
: Continuous forms
SELECTING PAPER PATH
Rear tractor and front optional cut sheet feeder
Rear tractor and rear optional cut sheet feeder
(2)
(3)
(1)
(2)
(1)
Front tractor
Rear tractor
(3)
Rear cut sheet feeder
Front cut sheet
feeder
(5)
Front and rear tractors (either optional)
NOTE
The number of cut sheets stacked
in the printer may be reduced
depending on printing conditions
and enviroments. When printing
thin paper, multipart copy paper,
or large size paper, frequently
remove the paper from the rear
stacker or the paper table. When
printing B-4 size or larger length
paper in portrait orientation, be
sure to set the paper table in stack
mode or place the rear stcker in up
position.
NOTE
When the cut sheet feeder is
installed at the rear of the printer,
the rear stacker paper capacity is a
maximum of 30 sheets.