Fujitsu DL9300 Printer User Manual


 
Setup Mode
USING SETUP MODE
User's Manual 5-35
CONFIGURATION ITEMS
AND OPTIONS
The CONFIG function defines the printer’s primary configuration.
You can set the following options to ensure that the printer meets
your requirements:
Tear off for continuous forms
Autoloading of single sheets
Direct decoding of certain commands
Settings for feeding, printing and ejecting
Table 5.6 describes the CONFIG items and options. Items are listed in
the order they are printed. The procedure for changing the options is
reffered to Setup Mode Example.
Table 5.6 CONFIG Items and Options
NOTE: Underlined options are the factory defaults.
CONFIG Items Options Description
<TEAROFF> Auto or manual tearoff feed.
MANUAL Automatic tearoff feed is invalid,
and tearoff feed must be done using
the TEAR OFF button.
AUTO Automatic tearoff feed is valid but
only for continuous forms. Tearoff
feed can also be done using the
TEAR OFF button.
<TEARPOS> Tearoff position.
VISIBLE Select this option when your
software positions forms to the next
top-of-form after printing the last
data. The printer performs tearoff
feed without adding a form feed
when data transfer has stopped.
ALWAYS Select this option when your soft-
ware stops after printing the last
data. The printer performs tearoff
feed after adding a form feed when
data transfer has stopped.