Filter
Top Products
User's ManualD-2
INTERFACE INFORMATION
Pin Return Signal Direc- Description
No. Pin No. name tion
119Data StrobeInputThis signal is a strobe pulse
(DSTB) for reading data (Data 1 to 8).
The printer reads data when
this signal is low. The pulse
width must be 1 µs or more at
the receiving terminal.
2–920--27Data 1 to 8InputData 8 (pin 9) is the most
significant bit; however, this
pin is not used in 7-bit ASCII
communications.
Logical 1 signals must go high
at least 1 µs before the falling
edge of the Data Strobe signal
and must stay high for at least
1 µs after the rising edge.
1028AcknowledgeOutputThis pulse signal indicates
(ACK) that the printer has received
data and is ready to accept the
next set of data.
This signal is also sent when
the printer is switched from
offline to online.
1129Busy OutputData cannot be received when
this signal is high. This signal
is high during data entry,
when the printer is offline,
when the buffer is full, or
when an error occurs.
1230Paper EmptyOutputThis signal is high when the
(PE) printer is out of paper.
13–Select OutputThis signal is high when the
(SLCT) printer is online.
14–Auto Feed XTInputNot used