Fujitsu DL9300 Printer User Manual


 
SETTING UP
2-36 User's Manual
Procedure
1. Insert the DLMENU disk in the floppy disk drive (e. g. A).
2. Type A: then press ENTER.
3. Type DLMENU\INSTALL then press ENTER.
4. To run DLMENU, type DLMENU then press ENTER.
The following main menu is displayed if the printer has no error
after the opening screen is displayed.
File(F)
Option(O) Help(H)
Menu function 1
Menu function 2
Hardware function
Adjust function
Config function
Key Guide
(Help windows : discribes item Indicated by cursor)
ALT+( ) : Short cut key
Enter :
TAB :
ESC : Cancel
Cursor :
F5 : Cuctum setup
SEND Exit
Menu function 1
FONT : COUR 10
QUALITY : LETTER
PITCH : 10CPI
LINE SP : 6 LPI
CHAR-W : NORMAL
CHAR-H : NORMAL
ATTRIB : NONE
PAGE LG : 11.0IN
COLOR : AUTOSEL
LFT-END : 1 COLM
TOP-MRG : 1 LINE
LANGUGE : USA
CHR-SET : SET 1
AGM : OFF
Main menu
5. To perform operations in the main menu, use the keys as
follows:
Select a pull-down menu: Alt key + F, S, or O key
Select (highlight) a feature or option: TAB and cursor keys
Confirm or execute: Enter key
Cancel: ESC key
To apply new options to the printer, press the Tab key to select
the SEND button and press the Enter key. To save the settings,
select the “Save current settings” function from the top menu
bar.
You can use the mouse cursor and the left mouse button instead
of the above keys.