Filter
Top Products
Setting Up
SETTING UP
User's Manual 2-7
To place the rear stacker in its down position, place the front mounting
pins beneath the stacker guides and slide the rear mounting pins into
the lower stacker grooves. (Adjust the letter C labeled on the rear
stacker to the letter C labeled on the printer. Insert the stacker in the
direction of the arrow.) The rear stacker is put in this position when a
cut sheet feeder is to be attached to the rear of the printer or using the
front tractor.
Installing the rear stacker (down position)
NOTE
Do not place the rear stacker under the stacker guides of the printer.
Stacker guide
Mounting pins
Lower groove
Upper cover
Upper groove
Rear
stacker
Lower groove
Bad placementGood placement
Stacker guide