Filter
Top Products
Chapter 1 Before Using This Product
IP-900 Series
4
Item Specification
Input video format 720 x 480i (59.94 Hz)
720 x 576i (50 Hz)
* Video input protection buffer OFF/ON can be specified.
Bit rate 720 x 480: 1 to 10 Mbps
352 x 480: 500Kbps to 10Mbps
720 x 576: 1 to 10 Mbps
352 x 576: 500Kbps to 10Mbps
Video PES “1Field/1PES” / “1Frame/1PES” selectable
Profile selection Either High profile or Main profile can be selected.
PPS interval GOP/Picture selectable
PPS ID Fixed/Adaptive selectable
Encoding control
mode
Standard (IBBP), Low latency (IPPP), or Low latency (PPPP) can be selected.
Pre-filter HEAVY, MEDIUM, LIGHT, or OFF can be selected.
Refresh cycle Selection can be made in three stages.
Interfaces Input: SD-SDI, HDMI (HDCP not supported), and analog video
Encoding format H.264 HP@L4
H.264 MP@L4
Input video format 1920 x 1080i (59.94 Hz)
1920 x 1080i (50 Hz)
1920 x 1080i (60 Hz)
1280 x 720p (59.94 Hz
1280 x 720p (50 Hz
* Video input protection buffer OFF/ON can be specified.
Bit rate 1920 x 1080: 4 to 27 Mbps
1440 x 1080: 4 to 27 Mbps
960 x 1080: 1 to 27 Mbps
1280 x 720: 4 to 27 Mbps
960 x 720: 4 to 27 Mbps
640 x 720: 1 to 27 Mbps
Video PES “1Field/1PES” / “1Frame/1PES” selectable
Profile selection Either High profile or Main profile can be selected.
PPS interval GOP/Picture selectable
PPS ID Fixed/Adaptive selectable
Encoding control
mode
Standard (IBBP), Low latency (IPPP), or Low latency (PPPP) can be selected.
Pre-filter HEAVY, MEDIUM, LIGHT, or OFF can be selected.
Refresh cycle Selection can be made in three stages.
Sub HD
video
Interfaces Input: HD-SDI and HDMI (HDCP not supported)
Encoding format H.264 HP@L3
H.264 MP@L3
H.264 MP@L1.3
Sub SD
video
Input video format 1920 x 1080i (59.94Hz)
1920 x 1080i (50Hz)
1280 x 720p (59.94Hz)
1280 x 720p (50Hz)
720 x 480i (59.94Hz)
720 x 576i (50Hz)