Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
103
3.5.2 Encoder Selection
* This function is enabled only when the device operation mode is decoder mode.
Click ENCODER SELECTION
in the left frame of the Web screen. The Encoder Selection window
appears in the right frame.
This window displays the status and IP address of the encoder ready to perform streaming.
Specifying the encoder distributing a stream starts receiving the stream. Specify in advance the IP
address of the decoder in the encoder as the destination. See Section 3.3.2for encoder setting. Table
3-29 Encoder Selection Items
lists the display items.
Figure 3-29 Encoder Selection Window