Filter
Top Products
Chapter 2 Installation & Operation
IP-900 Series
11
(3) Selecting software
Select installation file field. Select the file of the firmware to be updated.
(4) Starting installation
Click the
button. The following confirmation dialog box appears. Click the OK
button to start installation. Upon completion of installation, IP-900 series is automatically
rebooted.
* If the version of the firmware that to be installed is earlier than the one that is currently
installed on the IP-900 series, you can install it in the maintenance mode of the device. The
device can be booted as maintenance mode by pushing MNT button, and then the device is
initialized. Click the OK button to start the installation process if initialization will raise no
problems.
(5) Verifying the startup
Display the IP-900 series setup window from the Web browser, and verify that the new
software has been installed and started.
Do not power off or press the MNT button during installation. Doing so may prevent IP-900 series
from starting.
Do not access another Web page during installation. Otherwise, you may lose information on the
progress.