Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
36
3.2.6 Data Port
* Data Port is a group of setting items, of which 10 sets can be registered independently by
selecting data number as in 3.2.1 Configuration Data
.
This setup is performed to enable data communication with another device on the IP network by
connecting the external device through the RS-232C port (D-sub 9-pin) provided at the rear of IP-900
series.
Click DATA PORT
in the left frame of the Web screen. The Data Port window appears in the right
frame, where you can set parameters for data communication with another device via the IP network.
Make the required settings by referring to Table 3-7 Data Port Setting Items
and Table 3-8
Operations Modes
Figure 3-10 Data Port Window