Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
37
After the completion of the settings, click the button. The message below appears. Click
OK to apply the settings. *Reboot is not required.
Table 3-7 Data Port Setting Items
Item Description Parameter
Data port Specify whether to use data port
communication.
- Enable
- Disable (Default)
Operation mode Specify the operation mode of data
port communication.
- TCP server mode (bidirectional)
(Default)
- TCP server mode (receiving only)
- TCP client mode (bidirectional)
IP version Set the IP address version - IPv4 (Default)
- IPv6
Destination IP
address
Specify the IP address of the data
communication destination when
"TCP client mode (bidirectional)" is
set for [Test mode].
- IPv4 (Default)
- IPv6
Operation
settings
Specify the IP address of the data
communication destination when
"TCP client mode (bidirectional)" is
set for [Test mode].
Other than 0.0.0.0
(Default: 0.0.0.0)
Server mode Specify the port number of the own
device when "TCP server mode
(bidirectional)" is set for [Test mode].
1024 to 64000
(Default: 6000)
Specify the port number of the own
device when "TCP client mode
(bidirectional)" is set for [Test mode].
0 or 1024 to 64000
(Default: 0)
* If o is specified, a port number from
1024 to 4096 is automatically selected.
Port number
settings
Client mode
Specify the port number of the
destination device when "TCP client
mode (bidirectional)" is set for [Test
mode].
1024 to 64000
(Default: 6000)
RS-232C
settings
Timeout Specify in milliseconds the reception
timeout time for RS-232C.
20 to 200ms (Default: 20)
* The duration to detect a time-out is
defined as "the set value rounded down
by a multiple of '20[ms]'" + "RS-232C
polling interval of the device (20[ms])".
ex)
When '60' is set, the duration will be
'60' + '20' = 80 [ms]
When '50' is set, the duration will be
'40' + '20' = 60 [ms]