Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
62
3.2.12 Date & Time
Two types of setting modes are available. In one mode, you can enter arbitrary date and time data. In
another mode, you can instruct the system to synchronize with the time server on the network.
Click DATE & TIME
in the left frame of the Web screen. The Date & Time window appears in the
right frame, where you can set the date and time of the clock built in IP-900 series.
Clicking the
button sets the date and time of the PC. Clicking the
button after entering an arbitrary date and time sets the specified date and time.
Clicking the
button promptly adjusts the time with the time server
specified in Section 3.2.5, "Time Zone & Time Server." This function is enabled only when "Enable" is
specified for Auto Synchronization.
* Any date and time between 00:00:00 on January 1, 1980 and 23:59:59 on December 31, 2030 can
be specified.
Figure 3-19 Date & Time Window