Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
38
Item Description Parameter
Delimiter code 1 Specify the delimiter code 1 for
RS-232C.
Blank or hexadecimal number between
00 and ff
(Default: Blank)
* A blank field means that no value is
specified.
Delimiter code 2 Specify the delimiter code 2 for
RS-232C.
Blank or hexadecimal number between
00 and ff
(Default: Blank)
* A blank field means that no value is
specified.
Baud rate
Specify the RS-232C communication
speed.
1200/2400/4800/9600 (Default)
/19200/38400 bps
Bit length Specify the RS-232C character size. 7 bits or 8 bits (Default)
Parity Specify whether to use RS-232C
parity.
None (Default), Odd or Even
Stop bits Specify the length of RS-232C stop
bits.
1 bit (Default) or 2 bits
Flow control Specify whether to set RS-232C flow
control.
None (Default), RS or CS
Table 3-8 Operation Modes
Operation mode Description
(1)
TCP server mode
(bidirectional)
Bidirectional data communication is performed between the data port and
another device connected via the IP network. IP-900 series waits, at the
specified port number, for access through socket connection from the
destination device. (IP address setting is not required.)
(2)
TCP server mode
(receiving only)
Data received from another device connected via the IP network is output to
the data port. Data received from the data port is not sent to the destination.
IP-900 series waits, at the specified port number, for access through socket
connection from the destination device. (IP address setting is not required.)
(3)
TCP client mode
(bidirectional)
Bidirectional data communication is performed between the data port and
another device connected via the IP network. IP-900 series sets up a socket
connection through the specified port to the device with the specified IP
address.
* The following combinations of modes are available for data communication between IP-900 series:
(1) <-> (3)
(2) <-> (3)