Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
105
3.5.3 Operation & Status (Decoder)
* This function is enabled only when the device operation mode is decoder mode.
Click OPERATION & STATUS
in the left frame of the Web screen. The Operation & Status window
appears in the right frame.
Operation & Status information related to the decoder, including the stream receiving status, can be
checked.
Selecting {3sec, 5sec, or 10sec} from [Auto update] enables automatic updating of the Operation &
Status information in specified time intervals. Selecting {none} from [Auto update] disables the
automatic updating.
Figure 3-30 Operation & status (Decoder) Window
You can control starting and stopping of the receiving and decoding operation. When the decoding
operation is "Stopped," click the
button to start decoding. To stop decoding, click the
button.