Filter
Top Products
Chapter 2 Installation & Operation
IP-900 Series
16
Powering off on PPPoE connection
If you turn off the power to the IP-900 series while it is connected via PPPoE-connection, the
IP-900 series may take extra time to establish the next connection depending on the network
conditions. To prevent this, use the following procedure to turn off the power to the IP-900 series
to ensure that the PPPoE termination procedure is performed.
Hold down the MNT button for three seconds. When the software finishes termination
processing and the product becomes ready for power-off, the RDY LED goes off.
After verifying that the RDY LED has gone off, turn the power switch to the "{" position. The
PWR LED goes off, indicating that the power is turned off.