Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
52
Code Name Description Details (The part after the * mark is not displayed.)
I002 HDMI input down HDMI input signal not detected
*I002 HDMI input down recovery Normal HDMI input
I003 Analog input down Analog video input signal not detected
*I003 Analog input down recovery Normal analog video input
I011 Video input synchronization error Video input PLL synchronization error
occurred
*I011 Video input synchronization error
recovery
Recovered from video input PLL
synchronization error
I021 Input data error (*8) Count-up occurred in the performance
statistics error counter
#xxxxxxxxxxxxxxxx
* 64-bit hexadecimal number. For the meaning of each
bit, see Table 3-12, "Input data error bit format".
*I021 Input data error recovery (*8) Recovered from count-up of the
performance statistics error counter
E001 Power error (*1) Power failure occurred
#1 * Power failure on CNT board
#2 * Power failure on COD board
E003 Temperature error occurrence (*5) Extreme temperature (shutdown processing
started)
* Details are as follows:
#1/#2: Number of the temperature sensor that has
detected a temperature error
t1: Temperature indicated by temperature sensor 1
t2: Temperature indicated by temperature sensor 2
xxx: FAN rotational speed
E004 Flash ROM error (*1) Internal flash ROM access error occurred
/dev/mtd0 to 15
* Displays the occurrence range of access error.
E00A Flash ROM check sum error (*1) Operation data error detected in internal
Flash ROM
Software
bundle software
configuration
configuration#1 #10
* Displays the occurrence range of check sum errors.
E010 FAN error (*2) FAN error (low speed) or stopped xxxRPS * xxx: FAN rotational speed
*E010 FAN error recovery (*2) FAN speed recovery xxxRPS * xxx: FAN rotational speed