Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
45
Table 3-11 Alarm List
Code Name Description Details (The part after the * mark is not displayed.)
I001 SDI input down HD/SD-SDI input signal not detected
I002 HDMI input down HDMI input signal not detected
I003 Analog input down Analog video input signal not detected
I011 Video synchronization error Video input synchronization failure
I021 Input data error (*7) Count-up occurred in the performance
statistics error counter
#xxxxxxxxxxxxxxxx
* 64-bit hexadecimal number. For the meaning of
each bit, see Table 3-12, "Bit Formats for Input Data
Errors."
E001 Power error (*1) Power failure occurred
#1 * Power failure on CNT board
#2 * Power failure on COD board
E003 Temperature error occurrence (*5) Extreme temperature (shutdown
processing started)
#1 TEMP1=t1 TEMP2=t2 FAN=xxxRPS
#2 TEMP1=t1 TEMP2=t2 FAN=xxxRPS
* Details are as follows:
#1/#2: Number of the temperature sensor that has
detected a temperature error
t1: Temperature indicated by temperature sensor 1
t2: Temperature indicated by temperature sensor 2
xxx: FAN rotational speed
E004 Flash ROM error (*1) Internal flash ROM access error occurred
/dev/mtd0 to 15
* Displays the occurrence range of access error.
E00A Flash ROM check sum error (*1) Operation data error detected in internal
Flash ROM
software
bundle software
configuration
configuration#1 #10
option
* Displays the occurrence range of check sum errors.
E010 FAN error (*2) FAN error (low speed) or stopped xxxRPS * xxx: FAN rotational speed