Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
40
After the completion of the settings, click the button. The message below appears.
Click OK to apply the settings. * Reboot is not required.
Table 3-9 SNMP Setting Items
Item Description Parameter
SNMP Agent Specify whether to enable SNMP agent. - Disable (Default)
- Enable
SNMP version Specify the SNMP version of SNMP
manager.
- SNMPv1 (Default)
- SNMPv2c
Community
name
Specify the community name to accept
the SNMP request from the SNMP
manager.
Alphanumeric 16 characters
(Default: Blank)
IP version Specify the IP version of the IP address
of SNMP manager.
- IPv4 (Default)
- IPv6
Manager #N
IP address Specify the IP address of SNMP
manager.
(Max. 10 managers can be registered.)
An IP address other than
0.0.0.0
(Default: Blank)
* A blank field means that no
value is specified.
* You cannot specify a
multicast address.