Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
25
Registering configuration data
Select data numbers 1 to 10 from the drop-down list menu in the configuration data field.
Figure 3-4 Selecting Configuration Data
Assign the selected data a name using up to 16 alphanumeric characters in the Configuration
name field, and then click the
button. The dialog box shown below appears. Click the OK
button to change the registration number of the configuration data.
*) Reboot is required only when the operation mode is changed between encoder and decoder after
loading configuration.
Confirm that the configuration data number in the upper right red zone on the Basic setting
window has been changed to the previously selected number.
Configuration1: data1 Software: VxxLxxx