Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
64
● Deletion of the configuration data
All the configuration data currently stored in IP-900 series can be initialized by clicking the
button. This operation also resets information including the IP address to the state
before shipment from the factory.
Table 3-15 Software Management Items
Item Description
Current software version Displays the software version.
V-- L-- C-- is displayed immediately after shipment from the
factory.
Software
New software Specify the full path of the file to be installed. The Browse
button can also be used to select the file.
Configuration file to be
restored
To restore all the configuration data, specify the full path of the
file. The Browse button can also be used to select the file.
RESTORE Use this button to restore all the configuration data.
This button is enabled when a file name is specified in the
"Configuration file to be restored" field.
BACKUP Use this button to back up all the configuration data from the
IP-900 series to the PC.
Configuration
DELETE ALL Use this button to delete all the configuration data from the
IP-900 series.
This operation resets all the configuration data to the default.
Option license key Enter the license key obtained when the optional license was
purchased.
Option
Installed option Names of installed options are displayed.
If all the configuration data is changed (restored or deleted), the IP address, subnet mask, and gateway
may be changed. Note that this may cause an unexpected problem in your network.
Do not turn power off or press the MNT button while all the configuration data is being changed
(being restored or deleted). Doing so may prevent
IP-900 series from starting.
If you access another Web screen while all the configuration data is being changed (being restored or
deleted), you may lose information on the progress of the changing.