Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
32
After the completion of the settings, click button. The message below appears.
Table 3-4 Basic Setting Items
Item Description Parameter
Ethernet
common
settings
Ethernet type Select the LAN interface
operation mode.
- AUTO (default)
- 100Base-TX Full
- 100Base-TX Half
- 10Base-T Full
- 10Base-T Half
MTU size Specify in bytes the maximum
size of IP packets to be sent to
the LAN.
1280 to 1500 bytes
(Default: 1454)
* For PPPoE, specify 1454 (recommended).
IPv4 network
settings
IP address mode Specify the IPv4 address
acquisition method
- DHCP
- PPPoE
- Static IP (Default)
IP address
Specify the IPv4 address when
"Static IP" is set for [IP address
mode].
IPv4 address other than the following:
224.0.0.0 to 239.255.255.255 (Class D)
240.0.0.0 to 255.255.255.255 (Class E)
0.0.0.0, 127.0.0.0 to 127.255.255.255
(Default: 10.0.0.1)
Subnetmask
Specify the IPv4 subnet mask
when "Static IP" is set for [IP
address mode].
Subnet mask other than the following:
255.255.255.254,
255.255.255.255
(Default: 255.0.0.0)
Default Gateway
address
Specify the default gateway
address of IPv4 when "Static
IP" is set for [IP address mode].
IPv4 address other than the following:
224.0.0.0 to 239.255.255.255 (Class D)
240.0.0.0 to 255.255.255.255 (Class E)
127.0.0.0 to 127.255.255.255
(Default: None (represented as 0.0.0.0))
User ID for
PPPoE
Specify the user ID when
"PPPoE" is set for [IP address
mode].
64 en-size alphanumeric characters
(Default: Blank)