Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
42
Table 3-10 Operation & Status Display Items
Item Display
Serial number Displays the serial number
IP address (IPv4) {DHCP/PPPoE/Static IP}
Displays the IPv4 address acquisition mode.
[xxx.xxx.xxx.xxx (IPv4)
Displays the IPv4 address.
xxx.xxx.xxx.xxx: IPv4 address
Subnetmask (IPv4) xxx.xxx.xxx.xxx
Displays the IPv4 subnet mask.
xxx.xxx.xxx.xxx: Subnet mask
Default gateway address (IPv4) xxx.xxx.xxx.xxx
Displays the default gateway address of IPv4.
xxx.xxx.xxx.xxx: Default gateway address
IP address (IPv6)
Link-Local/[xxxx:xxxx: ... :xxxx(IPv6)]
Displays the IPv6 link-local address.
xxxx:xxxx: ... :xxxx: Link-Local address
{Stateless/Static IP}
Displays the IPv6 address acquisition method.
* If the IPv6 address acquisition method is "Stateless," up to four sets of global
unicast address/prefix are displayed according to the address acquisition
status.
[yyyy:yyyy: ... :(IPv6)]
Displays the IPv6 global unicast address.
yyyy:yyyy: ... :yyyy: Global unicast address
[zzz]
Displays the prefix of the IPv6 global unicast address.
zzz: Prefix
Default gateway address (IPv6) xxxx:xxxx: ... :xxxx
Displays the default gateway address of IPv6.
xxx:xxx. ... :xxx: Default gateway address
* If the IPv6 address acquisition method is "Stateless," up to four default
gateway addresses are displayed according to the address acquisition status.
LAN MAC address Displays the MAC address.
{Connected / Disconnected}
Displays the LINK status.
LAN link
{100Base-TX Full Duplex / 100Base-TX Half Duplex / 10Base-T Full
Duplex / 10Base-T Half Duplex}
Displays the LAN interface operation status.
Time server {Normal / Fault / Synchronization failure/ ---}
Displays the status of synchronization with the specified time server.