Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
98
Table 3-27 Recorder Operation & Status Display Items
Item Display
Recording mode
{Recording until full / Overwrite / Record until start position}
Displays the recording mode selected in the Settings window.
Recorder
{Recording / Stopped
Displays the operation status caused by the setting in the Settings window or by the
operation of the recording START or STOP button.
Media
{Equipped: Normal / Equipped: Fault / Equipped: Media Full /Unequipped}
Displays whether an error related to recording to the CF card occurred or that a CF card
is not mounted in the device.
* Notation: {A/B} indicates that either A or B is displayed.
The maximum system bit rate to record into CF card is limited up to 14.049 Mbps.
Recording to and reading from the CF card simultaneously is possible if the system bit rate does not
exceed 6 Mbps.
Recording and simultaneous streaming using the sub encoder are limited to cases in which [Video
resolution] is "352 x 240," "352 x 288," "176 x 112," or "176 x 144" as described in Sub encoder settings
(Encode) in Section 3.3.1, "Setting (Encoder)."