Filter
Top Products
Chapter 3 Web Operation
IP-900 Series
89
After completing the setting, click the button. The message below appears. Click OK
to apply the settings. * Reboot is not required.
Table 3-24 Main encoder/Sub encoder superimpose settings
Item Description Value
Superimpose
setting
Specify whether to enable
character superimposition by
using the superimpose function
to display the characters.
Enable
Disable (default)
Horizontal position Specify the number of pixels
from the left end of the window
to indicate the horizontal
position from where the
specified character string starts
to be superimposed.
0 to 1919
*1
Vertical position Specify the number of lines from
the top end of the window to
indicate the vertical position
from where the specified
character string starts to be
superimposed.
0 to 1079
*1
Font size Specify the font size of character
strings to be superimposed.
- SD:32/HD:64
Displays characters in a size of:
32×32 dots if the input resolution is SD
64×64 dots if the input resolution is HD
- SD:48/HD:96
Displays characters in a size of:
48×48 dots if the input resolution is SD
96×96 dots if the input resolution is HD
Main/Sub
encoder
superimpose
settings
1 to 4
Font color Specify the font color of
character strings to be
superimposed.
- White (default)
- Black
- Red
- Blue
- Green