Filter
Top Products
GE Fanuc PLC Targets
Configuring Communication
GFK-1918D CIMPLICITY Logic Developer - PLC Version 4.00 29
Set up a permanent IP address. For more information, see “To set a permanent IP
address for a PACSystems™ RX7i”.
To set a temporary IP address for a PACSystems™ RX7i
1. In the Utilities tab of the Navigator, double-click Set Temporary IP Address.
The Set Temporary IP Address dialog box appears.
2. In the MAC Address field, specify the MAC address for the PACSystems™ RX7i.
3. In the IP Address to Set field, specify the temporary IP address you want to set on the PACSystems™ RX7i.
4. If required, select the Network Interface Selection check box and specify the network interface the PACSystems™
RX7i is located on.
5. Click the Set IP button.
The IP address of the specified PLC or device is temporarily set to the indicated
address.
Warning: The IP address set by the Set Temporary IP Address utility will not be
retained through a power cycle. If you want to set a permanent IP address, you
must do so by other methods.