Filter
Top Products
Hardware Configuration (HWC)
60 CIMPLICITY Logic Developer - PLC Version 4.00 GFK-1918D
4
To replace the power supply for your remote I/O configuration
1. In the Project tab of the Navigator, expand the Hardware Configuration node of the remote I/O.
The Navigator displays the following:
2. Right-click the PWR node and choose Replace Module.
The Module Catalogue dialog box appears:
3. From the list, select the power supply that you want to configure for your system.
To add a new Carrier/Base to your VersaMax Remote I/O
1. In the Project tab of the Navigator, select a remote I/O target.
2. Expand the Hardware Configuration node and the Main Rack node.
The Navigator displays the following:
3. Right-click the Slot 0 node and choose Add Carrier/Base.