Filter
Top Products
GE Fanuc PLC Targets
Configuring Communication
GFK-1918D CIMPLICITY Logic Developer - PLC Version 4.00 31
The IP Address dialog box appears..
6. Enter the IP Address and click OK.
To set an IP address for a Series 90™-30 CPU364 or CPU374
Note: For CPU364 and higher-end Series 90™-30 CPUs, the Ethernet adapter is
built into the CPU. For other Series 90™-30 CPUs, the Ethernet connects through
an optional expansion slot on the rack.
1. Obtain an IP address, perhaps from your network administrator.
2. In the Project tab of the Navigator, expand the Hardware Configuration node to reveal the rack and
slot containing a CPU364 or CPU374.
3. Right-click the slot containing the CPU364 or CPU374 and choose Configure.
The Parameter editor appears.
4. In the Parameter editor, click the Ethernet tab.
The Parameter editor displays the contents of the Ethernet tab.
5. Double- click the IP address parameter.
The IP Address dialog box appears
6. Enter the IP address in the box and click OK.