Filter
Top Products
Hardware Configuration (HWC)
48 CIMPLICITY Logic Developer - PLC Version 4.00 GFK-1918D
4
To add a fan kit to a rack (PACSystems™ RX7i only)
1. In the Project tab of the Navigator, expand the Hardware Configuration folder.
2. Right-click a rack and choose Properties.
The rack’s properties are displayed in the Inspector.
3. In the Inspector, to the right of the Fan Catalog Number property, click .
The Fan Kits catalog opens.
4. Select the fan kit you want to add and click OK.
The fan kit is added to the rack.
To configure the Ethernet daughterboard (PACSystems™ RX7i only)
1. In the Project tab of the Navigator, expand the Hardware Configuration folder, then Rack 0 (the
Main rack), and then Slot 1.
2. Double-click Ethernet adapter.
The Parameter Editor window opens.
3. Configure the Ethernet adapter’s parameters as needed.
Navigator: Project tab PACSystems™
Ethernet Daughterboard