Filter
Top Products
Hardware Configuration (HWC)
56 CIMPLICITY Logic Developer - PLC Version 4.00 GFK-1918D
4
3. From the list, select Motion Mate DSM314.
4. Click OK.
A DSM314 is added to the hardware configuration of your project.
To configure a DSM314
1. In the Project tab of the Navigator, double-click the slot containing a Motion Mate DSM314.
The Parameter editor appears.
2. Configure the DSM314 by using the Parameter editor.
Note: For details on configuring the DSM314, see GFK-1742, Motion Mate
DSM314 for Series 90-30 PLCs Users Manual .