Filter
Top Products
Hardware Configuration (HWC)
GFK-1918D CIMPLICITY Logic Developer - PLC Version 4.00 55
Note: You can mirror as many times as necessary to synchronize the two HWCs
after modifying the primary HWC. Each time you mirror the primary HWC, the
secondary HWC is updated to reflect those changes.
Series 90™-30: DSM314 Motion Module
The Series 90™-30 supports a module which no other GE Fanuc PLC family
supports: the Motion Mate DSM314 (see page 91). The DSM314 is a high
performance, easy-to-use multi-axis motion control module. Compatible with
Series 90™-30 PLC logic solving and communications functions, the DSM314
supports the following servo types:
■
Digital - GE Fanuc digital servo amplifiers and motors.
■
Analog - GE Fanuc SL Series analog servos and third-party servos.
The DSM314 Motion module has four axes that can be individually configured in
Standard or Follower mode. It can control up to four analog mode servo axes or up
to two digital mode servo axes. When axis one and two are controlling digital
mode servos, axis three can control an analog servo.
In order to perform motion programming in Logic Developer - PLC, you must have
a DSM314 motion module properly configured (see page 91).
To add a DSM314 motion module
1. With a rack of the Hardware Configuration node expanded, right-click the empty slot you want to add a
DSM314 motion module to and choose Add Module.
The Module Catalog dialog box appears.
2. On the Module Catalog dialog box, click the Motion tab.
A selection of motion modules appears in the Module Catalog dialog box.
Want to know more?
In the Help Index, look up “Redundancy”.