Filter
Top Products
Hardware Configuration (HWC)
GFK-1918D CIMPLICITY Logic Developer - PLC Version 4.00 53
3. Click Next and follow the wizard to the end. The wizard adds a redundant CPU, the Bus Transmitter Module (BTM)
and the Redundancy Communications Module (RCM) to the configuration.
Note: The target property, Dual HWC, is now available in the Inspector and is set
to False.
Adding Genius Bus Controllers (GBC) to your system (PACSystems™ RX7i and Series 90™-70)
1. In the Project tab of the Navigator, expand the target for which you want to set up redundancy.
2. Right-click Hardware Configuration, point to Redundancy, and choose Wizard.
The Redundancy Wizards dialog box appears.