Filter
Top Products
Hardware Configuration (HWC)
GFK-1918D CIMPLICITY Logic Developer - PLC Version 4.00 47
2. Modify the settings as required. For information on any parameter, select the parameter.
Help is displayed in the Companion.
Tip: To open the Companion, press S
HIFT+F11.
To add a secondary rack (PACSystems™ RX7i only)
Note: On Series 90™-70 and Series 90™-30 PLCs, seven secondary racks are
added by default to the HWC. You do not need to add them.
1. In the Project tab of the Navigator, right-click the HWC node and choose Add Rack.
The Module Catalog dialog box appears listing available rack types.
2. Select a rack and click OK.
The Series 90™-70 expansion rack is added to the PACSystems™ RX7i rack
system. It is assigned an available number in the range of 1 through 7, excluding
numbers already assigned to other expansion racks.
To replace a rack
1. In the Project tab of the Navigator, right-click a rack node and choose Replace Rack.
The Module Catalog dialog box appears listing available rack types.
2. Select a rack and click OK.
Navigator: Project tab
PACSystems™ HWC configuration
Navigator: Project tab
HWC configuration