covering the ink nozzles, carefully remove the tape from the print cartridges. Do not
touch the ink nozzles or the copper-colored contacts.
1 Copper-colored contacts
2 Plastic tape with pink pull tab (must be removed before installing)
3 Ink nozzles under tape
Cause: The protective plastic tape was only partially removed from the print
cartridge.
Ink is spraying the inside of the product when I print a photo
Solution: Make sure you load photo paper in the input tray before you print a
borderless print job.
For more information, see:
“
Load full-size paper or small-size photo paper” on page 20
Cause: You were using the wrong paper type. The borderless print settings require
you to print on photo paper.
Memory card troubleshooting
Use this section to solve these memory card problems:
•
My memory card no longer works in my digital camera
•
The Photo light next to the memory card slots is blinking
•
The On button is blinking
•
The product does not read the memory card
•
The photos on the memory card do not transfer to my computer
Memory card troubleshooting 129
Troubleshooting